Great news!! Quigley has opened up the order banks for the Ford 6.8L E-series van models!!
Due to unforeseen circumstances we are forced to reschedule the 2012 Quigley Van Jam for fall of 2012! Yes! After rekindling The Quigley Rally last Sept. we are heading back to Rausch Creek Offroad Park in Pine Grove, PA for the 2012 Quigley Van-Jam.
The 2012 GM Northeast Regional Fleet & Commercial show is being held March 21-22, 2012 in Atlantic City...
Welcome to our 'Self-Help' section concerning Quigley products, procedures, and other issues. If you don't find what you need, use the contact us submission form. Thank you.
If my local dealer does not work with Quigley what should I do? If you experience any difficulty in locating a dealership ready to provide you with a Quigley 4x4 drive, please call our sales department at 1-800-233-9358. We keep a record of Quigley recommended dealerships, and there is probably one in your area.
Is overall weight a concern? Weight analysis is of particular importance to us. Every vehicle is weighed as soon as it arrives at Quigley’s to make sure the vehicle does not exceed the Gross Vehicle Weight Rating. (GVWR). If you want to know the pre-conversion weight that your vehicle cannot exceed, please contact our sales department at sales@quigley4x4.com.
What is Quigley's warranty? Quigley Motor Company offers a 3-year / 36,000 mile limited warranty. This warranty includes only those parts provided by Quigley Motor Company in its written warranty policy.
Does the 4x4 conversion void the factory warranty? The factory warranty is retained on all unaltered portions of the vehicle.
How do I get reimbursed for any service on the 4x4 system? All warranty service will require prior authorization from Quigley Motor Company before any services are performed The servicing dealer will be reimbursed at published Service Labor Time Standards at a rate to be determined prior to service. Some repairs are not reimbursed completely.
What types of vehicles can I have converted to 4-wheel drive? We install our 4-wheel drive on new Ford, Chevrolet, and GMC full-sized and cut-aways. At this time, we do not offer 4- wheel drive on Dodge products.
How long will it take for delivery of my vehicle? After placing any order, your vehicle will be added to our production schedule on a first come, first served basis, which normally is between 4 to8 weeks after the receipt of the vehicle at Quigley Motor Company. Your vehicle is usually ready to be shipped within two weeks after entering into Quigley’s production.
Where will my vehicle be shipped to? Depending on the pre-arranged shipping instruction, it will be shipped to the ordering dealership or another pre-determined location.
Can I check on the status of my vehicle? If you want to know the status of your vehicle in the production process, please call our vehicle transportation department at 1-800-233-9358 ext 116 or email them.
How do I get to Quigley? For detailed directions, click here.
Is Quigley accepting applications? No, not at this time.
Do I need an appointment to fill out an employment application? No, you are welcome to stop by and fill out an application in our lobby.
Abbreviation for Four-Wheel Drive.
Anti-Lock Brake System
Metal sleeve that connects the two ends of the tie-rod together. Used to adjust for alignment specifications. There is also an adjusting sleeve on the drag link which is used to align the steering wheel.
The axle receives the torque from the drive shaft which then displaces the torque to the wheels. This sets the wheels in motion.
A 4x4 vehicle consists of two axles, the front and rear. The front axle can either be a solid axle, as is the rear, or can consist of two axle halves, as with the IFS 4x4 system.
In an IFS system, the axle doesn't consist of one solid, rigid metal casing. It is divided into two separate axle shafts. Each axle is commonly referred to as an Axle Half or Half Axle Shaft.
Connects the steering knuckles to the axle on the solid axle and for the IFS system it connects the upper and lower control arms to the steering knuckle.
A brake caliper, or just a caliper, is the "muscle" of the brake system. This mechanism also houses the brake pads or shoes and the ABS control valve. It receives fluid from the master cylinder forcing the brake pads or shoes against the rotor causing the rotors to slow and/or stop.
A friction bearing part that clamps down onto the rotor causing the rotor to slow and/or stop.
This in an incomplete vehicle that consists of only the cabin, occupants compartment, and requires the addition of cargo-carrying, work-performing or load-bearing components to perform its intended function.
Connects or "links" each tie-rod together on the IFS. It is the center connection of the two tie-rods. It is mounted by both the Pitman Arm and the Idler Arm. It serves the same purpose for the IFS system as the Drag Link does on the solid axle conversion.
The point at which the entire weight of the vehicle may be considered as concentrated so that if supported at this point, the vehicle would remain in equilibrium.
Also known as the "A-Arm". The suspension component that holds the Steering Knuckles to the frame.
Constant Velocity Joint.
Houses the gears of the axle. The axle shafts mate to the gears inside the differential. The differential is also referred to as the "Pumpkin".
Connects the Pitman Arm to the tie-rod or right steering knuckle. This is how the steering is transferred from the steering box to the steering knuckles.
A cylindrical metallic tube that delivers the torque from the Transfer Case to the axles
Serves as protection, especially for the fuel tank, just in case the drive shaft breaks. It will contain the shaft and keep it from hitting other parts under the vehicle's body.
An axle that contains two wheels & tires on each side.
Front Gross Axle Weight Rating. Also referred to as GAWR Front. This is the maximum load that the front axle and suspension can handle.
Is the abbreviation for the Federal Motor Vehicles Safety Standards. The Federal Motor Vehicle Safety Standards are the guidelines and laws set in place by the United States Federal Government. All motor vehicles must adhere to these standards.
Gross Vehicle Weight Rating: This is the maximum weight that a vehicle can handle, including passengers, full fluids and load weight.
Where the passenger's hip, the pivot joint of the torso and thigh, would be located when in the seated position.Every seating position has a measurement called the hip-point. QMCI defines this measurement as the distance from the driver's hip to that of the seating position being measured. Note that the front passenger, directly to the right of the driver has the same hip-point of the driver. The driver's hip-point is already given by the vehicle manufacturer, either Ford or GM.
Houses the wheel bearings. On the Ford axle, the hub assembly is bolted directly to the steering knuckle, however with the Dana axle the hub is mounted to the spindle
Locks the wheel hub to the axle shaft. This is how the torque is supplied to the wheels when placed in four-wheel drive. When the hub lock is in the free position the wheel rotates free of torque from the axle.
Steering component that serves as a mounting surface between the frame and the Center Link on the IFS system. Looks like the Pitman Arm but is on the opposite side of the Pitman Arm.
Independent Front Suspension.
A tapered, threaded stud connecting the axle to the steering knuckle on the Dana style axle.
The nut that fastens the wheel to the rotor.
Short for multiple passenger vehicle. Multiple passenger vehicle is defined as a vehicle that carries more than two but less than ten passengers. A vehicle with two or less is commonly referred to as a truck. Any vehicle with ten or more passengers is referred to as a bus.
Rear Gross Axle Weight Rating. Also referred to as GAWR Rear. This is the maximum load that the rear axle and suspension can handle.
© All contents copyright 2011 Quigley Motor Company, Inc. TEL (717) 266-5631 · US (800) 233-9358 · FAX (717) 266-6248
>MVP Member
Central Contractor Registration
GSA Schedule code "AWDC"